Neuton P
OWER
E
QUIPMENT
7 5 M E I G S R O A D , V E R G E N N E S , V E R M O N T 0 5 4 9 1
www.neutonpower.com
©2011 Neuton Power Equipment 286461A
Daily Checklist, Cleaning and Storing for your NEUTON Corded 16” Chain Saw
To help maintain your NEUTON Chain Saw for optimum performance, we recommend you follow this checklist each time you use your Saw.
Do not plug in the power cord until you have completed all of the daily checks.
[ ] INSPECT: Before inserting the power cord, inspect for any visible damage to the Chain, Bar Guide, Hand Guard, or Motor Housing. Inspect
the oil port and Bar Guide rails and clean them to remove any debris.
Check the Chain tension.
Check the Bar and Chain Oil level, fill with only new Chain Oil specifically formulated for chainsaws
.
[ ] NOISES: If you notice anything unusual, such as a vibration or odd sound, shut the Saw OFF immediately. Remove the power cord and
check the Saw for any damage.
If you cannot find the cause of the problem or are uncertain what to do, then have the Saw inspected by a qualified repair shop
before using it or visit our website at
www.neutonpower.com
.
•
Unplug the power cord and allow the Saw to cool for at least five (5) minutes before servicing or storing.
•
If you drop the Saw, carefully inspect it for damage. If the Guide Bar is bent, Housing cracked, or Handles broken or if you see any other
condition that may affect the Saw's operation, visit our website at
www.neutonpower.com
or call Neuton Power Equipment Toll Free at:
1-866-NEUTON1 (638-8661)
for assistance before putting it back into use.
Cleaning the Chain Saw
Use only mild soap and a damp cloth to clean the Saw. Never let any liquid get inside the Motor Housing and NEVER immerse any part of
the Saw Housing into a liquid.
Storing
[ ] Ensure that the plastic Bar Cover is in place when storing.
[ ] Do not store the Saw near chemicals, such as fertilizers, organic or other solvents. Do not expose brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., to the plastic parts of the Saw. These products are often highly corrosive and may cause permanent
damage, weaken, or destroy the plastic to your Saw.
[ ] When not in use, your NEUTON Corded 16” Chain Saw should be stored indoors in a dry and high or locked-up place, out of reach of
children.
Copyrights and Trademarks
©
2011 Neuton Power Equipment, a division of Country Home Products
NEUTON and NEUTON logo are trademarks of Country Home Products
All rights reserved.
Documentation
Produced in China for Neuton Power Equipment
