NEUTON
Corded Pole Saw
-
Safety & Operating Instructions
3
Protecting Yourself and Those around You
This is a Corded tool, with rotating Cutting Teeth operating with high energy. You must operate the tool safely. Unsafe operation can
create a number of hazards for you, as well as anyone else in the nearby area. Always take the following precautions when using this
tool:
•
Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people, their property, and
themselves.
•
Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the Saw and the activity of
cutting. Never assume that children will remain where you last saw them.
•
When cutting a tree limb, keep everyone a safe distance from the cutting area. The safe distance should be at least twice the length of the
limb that you are cutting. Stop the Saw when another person or pet approaches. If the tree limb makes contact with any utility line, notify
the utility company immediately.
•
Only allow responsible individuals who have a thorough understanding of these instructions to operate the Saw. Never allow children to
operate the tool.
•
If you are ever unsure about an action you are about to take, please do not do it.
Dressing Appropriately
•
Always wear protective goggles or safety glasses with side shields that are marked to comply with ANSI Z87.1 standard when using your
NEUTON Corded Pole Saw to protect against thrown chips.
•
We recommend the use of ear protectors or earplugs rated for at least 20 DBA to protect your hearing.
•
Wear shoes with non-slip treads when using the Saw. If you have safety shoes, wear them. Do not use the Saw while barefoot or wearing
sandals with exposed toes or heels.
•
Wear a safety hard hat with a full-face shield that meets the ANSI Standards ANSI Z89.1 or CE Standards while operating the pole saw.
•
We recommend wearing long pants and non-slip rubber gloves while using this Saw. Be sure the gloves fit properly and do not have loose
cuffs or drawstrings.
Preparing to Use Your Pole Saw
Read, understand, and follow all instructions on the Saw and in the manual. Be thoroughly familiar with the control and the proper use of the
Saw before starting.
Operating Your Pole Saw Safely
•
If the Saw jams on any electrical cord or line,
DO NOT TOUCH THE BAR OR CHAIN, THEY CAN BECOME ELECTRICALLY LIVE AND VERY
DANGEROUS
. Safely disconnect the damaged electrical cord or line from its power source. If possible, do so safely. If in doubt, call an
electrician or an electrical contractor for assistance. Failure to heed this DANGER will result in death or serious personal injury.
•
This Saw can sever body parts! Keep hands and feet away from the Chain and always keep both hands on the Pole when using the Saw.
•
Do not use your NEUTON Corded Pole Saw for any job other than the intended use.
•
Avoid unintentional starting - never carry the NEUTON Corded Pole Saw with your finger on the ON/OFF Trigger.
•
Protect yourself from electrocution; maintain a minimum of 50ft (15m) from overhead electrical lines.
•
Remove the power cord from the Saw and wear gloves to protect your hands from the Chain teeth
when inspecting or cleaning material
from the Saw.
•
Never pick up or hold the Saw by the cutting Chain.
•
Keep both hands securely on pole and handle when carrying or operating the Saw.
•
Be aware that the cutting Chain coasts to a stop after releasing the ON/OFF Trigger; it does not stop immediately.
•
Do not operate the Saw in gaseous or explosive atmospheres. Motors in these tools normally spark, and the sparks might ignite fumes.
•
Do not operate the Saw while in a tree, on a ladder or on a scaffold.
•
Never stand under the limb that you are trimming. Position yourself out of the way of falling debris.
•
When not in use, the Pole Saw should be stored indoors in a dry and high or locked-up place, out of the reach of children.
