Disassembly:
Data subject to change without prior notice.
9/99 : 3102M0751
.
1999 NEUTRIK ALL RIGHTS RESERVED.
- Push the complete insert into the housing as shown (pay attention to the currect radial
position).
Female connector:
Press down the latching spring befor entering the housing.
NOTE
The assembly is finished when:
Female: - The insert has snapped into the housing and the latch has returned to its
orginal position.
Male:
- The insert has snapped into the housing.
Female: - Press the latching and the mating face completely down.
- Push the insert with the cable out of the housing.
Male:
- Press the mating face completely down and push the insert with the cable out
of the housing.
NEUTRIK AG
NEUTRIK (UK) Ltd.
NEUTRIK Tokyo Ltd.
NEUTRIK Zürich AG
NEUTRIK USA INC.
NEUTRIK HGK
www.neutrik.com
Liechtenstein
Great Britain
Japan
Switzerland
USA
Hong Kong
Tel.: +423/237 24 24
Tel.: +44 19 83/811 441
Tel.: +81/3/5411 25551
T
Fax: +423/232 53 93
Fax: +44 19 83/811 439
Fax: +81/3/5411 2827
Tel.: +41 1/734 0400
el.: +1 732/901 9488
Tel.: +852/2/898/9366
Fax: +41 1/734 3891
Fax: +1 732/901 9608
Fax: +852/2/898/7603
SNAP IN
SNAP IN