Next crimp the end of the plug containing the cable
with a standard 5.41 mm hexagonal crimping Tool
(RG 58).
Crimp only in the area designated in figure 5!
Finish the installation sliding the cover over the plug,
so that the cover’s locking tooth rests in the plug’s
notch labelled
displayed in figure 6.
D
figure 5
figure 6
Position a screw driver into one of the two tiny slots
as shown in figure 1 and bend out the plastic snap.
Slide the plastic cover from the connector.
figure 1
figure 2
D
Disassembly:
D
Data subject to change without prior notice. 2003 NEUTRIK . ALL RIGHTS RESERVED.
©
®
R
NE
U
T
I
K
R
R
CONNECTING THE WORLD
NEUTRIK AG
NEUTRIK Zürich AG
NEUTRIK (UK) Ltd.
NEUTRIK USA INC.
NEUTRIK Tokyo Ltd.
NEUTRIK France
NEUTRIK Vertriebs GmbH
Liechtenstein
Great Britain
Switzerland
USA
Japan
France
Germany / Netherlands
Tel.: +423/237 24 24
Tel.: +41 1/736 5010
Tel.: +44 1983/811 441
Tel.: +1 732/901 9488
Tel.: +81 3/3663 4733
Tel.: +33 1/4131 6750
Tel.: +49 8131/28 08 90
Fax: +423/232 53 93
Fax: +41 1/736 5011
Fax: +44 1983/811 439
Fax: +1 732/901 9608
Fax: +81 3/3663 4796
Fax: +33 1/4131 0511
Fax: +49 8131/28 08-30
www.neutrik.com
Draft. Nr.:
BDA 034
Update:
/
3102M0531
21.10. 2003
