Page 4 of 13
NPPA-TT-PT Instruction Manual
2. Replacement of Jack Pairs
Each individual jack pair can be exchanged quickly and without fuss even while the panel is "on
air". For replacement simply remove the easy accessible jack pairs.
Module consisting of 2 Jack Pairs
Remove Front Panel by unscrewing the 3 black cross-recessed
screws (M3x8 Taptite), remove the two side-stops.
Push out the channel identification strips.
Pull one module out of the casing using the supplied
disassembling pliers
Alternatively the jack pairs may be pulled out by the use of two
Bantam plugs (diagonally plugged in).
