Page 8 of 13
NPPA-TT-PT Instruction Manual
5. Wiring
For access to the terminals remove the top- and bottom-cover with three cross-recessed screws
(M2.5x8) each fixed in a triangle.
Rear front for wiring
Spring loaded push-terminals with gas tight connection enable fast and easy wiring. NO
soldering or fixing with screws is necessary.
Simply insert the stripped wire (6 mm) after pressing down the white key with a screwdriver.
Color coding
of terminals:
Orange
–
Tip ()
Black
– Ring
(signal
-)
White
– Sleeve
(shield)
The terminal will handle solid and stranded wire up to 20AWG (0.5 mm
2
). Solid wires up to
18AWG (0.75mm
2
) are possible.
Wiring with spring loaded push terminals (PT)
Tip
Ring
Sleeve
