I
HANDLING INSTRUCTION
®
optical
CON
DRAGONFLY
2
BDA 567
A Chassis Connector Preparation
Male Chassis
Pull of the strain relief boot of the XB2 connector
and slide it slightly to the back.
Place the XB2 connector from the top into the
carrier (1) and slide the XB2 connector (2) from
the front into the carrier.
Slide the strain relief boot back in position.
Connect the carrier from the back into the male
chassis.
Attention! Check the correct keying position.
A
B
C
D
A
B
C
D
1.
2.
KEY DOWN
CAUTION:
Laser radiation, do not look directly into beam of light!
CAUTION:
To avoid the risk of electric shock. Always disconnect the connector
from the power source.
