CAUTION:
Laser radiation, do not look directly into beam of light!
Inspection & Dry cleaning (using FOCD-DC125)
Disconnect both cable ends for safety reasons.
Invisible laser radiation may be emitted from
disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments.
Remove dust cap from the connector (A) and mount
NEUTRIK FOCD-STD inspection tool on it until it is
locked (B).
Prepare the optical fiber video probe with the
correlate tip (C).
Under the following QR-code you can find a list with
The sealing shutter mechanism of the optical
CON
avoids contamination of the LC ferrule locked inside.
®
The dust-proof design reduces maintenance intervals to a minimum; if nevertheless necessary,
follows the maintenance procedure below to avoid damages on the due to inpropes cleaning.
2
C
1.
1.1
1.2
1.3
optical fiber Microscope
B
Service tool (FOCD-STD)
BDA 520
A.
Connector Cleaning / Inspection
Intervall:
every 500 matings recommended
Tools:
Ÿ
NEUTRIK DUO service Tool (FOCD-STD)
®
Ÿ
Dry Cleaner 1.25 mm (FOCD-DC125)
Ÿ
optical fiber video probe
A
opticalCON
LC tip
opticalCON
I
HANDLING INSTRUCTION
®
optical
CON
DUO
