New Air Refrigeration
INSTALLATION
& OPERATION
OPERATION
1. After installation and adjustment, the refrigerator will start working automatically.
2. Clean the interior cabinet prior to the first use. The refrigerator should be operating for a
period of time to confirm the refrigeration system is functioning properly. After the
refrigerator reaches a set temperature, food can be put into it successively.
3. When put into the refrigerator, the foods should be placed in order, to avoid that the foods
plug the air inlet and outlet and then influence the cold air circulating inside the cabinet.
4. Not less than two checks should be taken every day to check whether the refrigerator
temperature is normal.
5. Clean and disinfect inside the cabinet regularly to kill the bacteria, so as not to influence the
food hygiene. Before washing and disinfecting, please turn off the power, wrap the electrical
elements with plastic films, and do not wash the internal cabinet directly with water.
6. The operation and clean-up of the refrigeration compressor unit should be observed
regularly. When there is too much dust in the condenser, the ventilating and refrigerating
effects will be influenced, so it should be cleaned timely. Users are recommended to clean the
condenser once every three months.
7. Methods of condenser washing: (1) Turn off the power and wrap the electrical elements with
plastic film; (2) Use the compressed air to blow or tap water to wash the condenser dust.
(notice: when washed with tap water, switch on the power after the system being dried.)
8. For long-term storage, ensure you clean the internal and external components of the cabinet.
Then dry and place it in dry, cool ventilated place. When reactivating the unit, check the
electrical lines to see whether they are damaged. It is recommended to have an electrician
inspect the unit and make sure the equipment can be restarted to use.
8
NGR Series: Installation & Operation
