31
Innova 4200
•
M1233-0053
User’s Guide
7.10 Gassing Cultures in the Innova 4200
There is an optional gassing manifold (M1233-0291) available for the 4200. The gassing
manifold is installed in the gassing port on the right hand side of the unit. Instructions on
how to install the gassing manifold are included with the manifold.
7.11 Accessory Recorder Connector
To record speed and temperature, an accessory recorder can be installed on the back
panel of the shaker (
see Figure 4
). The recorder should have the following capabilities:
•
Two channels, required for Speed and Temperature. Each channel should have signal
conditioning which accepts 0-5 volt input.
•
The pin-out diagram and scale below identifies the application.
A mating connector is required on the recorder cable (not supplied).
(This is a 9-pin male D subminiature connector—AMP Amplimite HDP-20 series or
equivalent.)
Figure 11: Detail of 9-Pin Recorder Connector
5 4 3 2 1
9 8 7 6
Pin Number
Signal Name
Scale
6
2
Speed
Ground
1V = 100 RPM
7
Temperature
1V = 20°C
3 Ground
Summary of Contents for innOva 4200
