- 24 -
(C) Logging
In user mode, take the following process.
1) When [LOG] is displayed, press both [ AIR ADJ.] and [ POWER] buttons
at the same time.
--> The current status (“LOG OFF (logging is OFF)” or “LOG IN” (logging is ON)
will be indicated.
2) To select [LOG DEL] (delete the logging data) or [LOG TIME] (logging cycle),
press the [ AIR ADJ.] button.
3) See the followings for each setting.
(C-1) Start Logging
1) When [LOG OFF] is displayed, press the [ AIR ADJ.] and [ POWER]
buttons at the same time.
--> [LOG ON] will be indicated. The number in the bottom left shows the current
capacity for data logging from 0 to 100%.
2) To set ON (start), press both [ AIR ADJ.] and [ POWER] buttons at the
same time.
--> Returns to <Gas Concentration Display> after two beep
sounds, and “LOG” (logging is ON) will blink in the
bottom right of the LCD.
•
Make sure to perform clock adjustment before starting data logging.
•
To read the logging data, PC and XA-4000IIL Datalogger Kit (sold
separately) are necessary. Read the instruction manual of Datalogger Kit
for how to read the logging data.
NOTE
MENU
OR
(Logging is OFF)
Blinking
(Logging is ON)
Blinking
MENU
(Logging is OFF)
Blinking
Blinking
MENU
Blinking
(Logging is ON)
If the power is turned OFF while data logging is in
progress, the data will be saved automatically and
the logging will stop.
NOTE
▲
▲
<Logging cycle> <Data logging Communication>
OR
<Logging ON>
<Logging OFF>
<Delete logging data>
▲
▲
▲
▲
▲
▲
- 23 -
(B-4) Long Life Mode
Long Life Mode is applied only to the models with combustible gas sensor, and factory
default is set to ON. When the long life mode is turned to OFF, the detection cycle of
combustible gas sensor will be short and response time will be fast, but the battery life
will be about half of the long life mode ON.
Long Life Mode
Continuous Use Time
ON
About 40 hours
OFF
About 20 hours
* The battery life may vary depending on environment, use condition, and many other factors.
Low temperature may shorten the battery life due to the battery property.
1) When [LONG] is displayed, press both [ AIR
ADJ.] and [ POWER] buttons at the same
time.
--> The current status (“ON” or “OFF”) will be
indicated. When the setting is ON, L will
appear in the center bottom of the LCD.
2) Press the [ AIR ADJ.] button.
--> The current status will be changed.
When OFF is selected, L will go off.
When ON is selected, L will appear in the center
bottom of the LCD.
3) To save the setting, press both [ AIR ADJ.] and
[ POWER] buttons at the same time.
--> “SAVE OK?” will be displayed.
4) Press both [ AIR ADJ.] and [ POWER] buttons at
the same time for OK.
--> Returns to [LONG] screen after two beep sounds.
5) To continue each setting, press the [ AIR ADJ.] button
and select next setting. (See “
(B) Each Setting
” on page
20)
6) To quit user mode, keep pressing the [ POWER]
button until it returns to the <Gas Concentration Display>.
--> When the long life mode is ON, long life mode icon L
will appear on <Gas Concentration Display>.
The long life mode setting will remain efective even after the power is
turned OFF or a battery is removed.
NOTE
<Long life mode is ON>
MENU
For the models without combustible gas sensor, a beep
will sound and it will remain displaying [LONG].
NOTE
(OFF is selected)
MENU
MENU
MENU
(Long life mode is ON)
▲
▲
▲
▲
▲
