-7-
-8-
5 Wall-mounted
Note: The installation height of 1.5 meters here is the recommended
installation height, and users can adjust it according to their height.
4.4
Adjust to best angle and detection position of the detector.
4.5
After temperature detect are confirmed , make detect position mark
on the ground for accurate detection.
Note:
There is no need to move or adjust the relevant position or
height after installation is completed. Due to the height difference of
the inspected person, the inspected person may need to cooperate
actively to ensure the accuracy of the inspection data.
The installation position
The detecting
position
Installation with 86 boxes
Step 1:
Make holes in the wall according to the mounting bracket and
install 86 boxes.
Step 2:
Use a special tamper-proof wrench to loosen the tamper-resis-
tant fixing screws at the bottom of the device, remove the mounting
plate, and the hanging plate is fixed on the 86 box as shown below.
Step 3:
Hang the device from top to bottom on the mounting plate.
Step 4:
Use a special tamper wrench at the bottom of the device to
screw the tamper screws.
Installation without 86 boxes:
Step 1:
Fix the mounting base on the mounting wall as shown in the
figure below.
Step 2:
Use a special tamper-proof wrench to loosen the tamper-re-
sistant fixing screws at the bottom of the device, remove the mounting
plate, and lock it to the mounting base plate according to the hole
position.
Step 3:
Hang the device from top to bottom on the mounting plate.
Step 4:
Use a special tamper wrench at the bottom of the device to
lock the tamper screws.