Safety instructions
224473
14
3.7.3. Load stability
Pay attention to the loader and implement positions.
Objects can fall or roll backwards onto the operator or a
bystander when the loader is raised.
Only lift loads which can be contained in, and are intended
for, the specific implement.
Fig. 27 Pay attention to the loader and implement positions;
objects may fall off.
If the tractor is only equipped with Roll Over Protective
Structure (ROPS), and does not have a Falling Objects
Protective Structure (FOPS), there is only limited protection
against falling loads. The operator risks injury if the load
falls when the loader is being operated at height.
Exercise caution when working with raised loads.
•
Only use implements that are approved for the relevant
application.
•
Make sure that the load is positioned securely in
the implement. When it comes to loose material,
the implement must not be overfilled, and for solid
material, the load must not stick up above the rear of
the implement.
Fig. 28 Only lift loads which can be contained in, and are
intended for, the specific implement.
•
Adjust the tilt angle of the implement when the load
is raised so that the load is not directed towards the
operator.
Fig. 29 Exercise caution when working with raised loads.
Summary of Contents for 611TL
Page 2: ......