Operation
214811
31
Move the locking lever to the disengaged (open) position
(position 1).
CAUTION:
Risk of pinching.
The locking lever is spring loaded when in
position 1.
1
Fig. 71 Move the locking lever to the disengaged (open)
position (position 1).
Lower the loader to the ground and continue lowering the
loader until the implement is disconnected from the loader's
tool carrier.
Back tractor/loader away from the implement.
Fig. 72 Lower the loader until the implement is loose.
If no implement is to be coupled to the tool carrier, the lever
and the mechanism should be set into the engaged position,
position 2.
To engage the locking lever completely roll the tool carrier
back with the implement rams with the loader just above
the ground or engage the lever manually.
2
Fig. 73 Locking lever in engaged position, position 2.
5.7.2. Coupling implements, Euro 8 Tool
carrier
Move the locking lever to the disengaged (open) position
(position 1).
NOTE:
It is easiest to disengage the locking lever to the
disengaged position if the loader is 12 - 24 inch off the
ground.
CAUTION:
Risk of pinching.
The locking lever is spring loaded when in
position 1.
1
Fig. 74 Move the locking lever to the disengaged (open)
position (position 1).
Summary of Contents for 611TL
Page 2: ......