4 - OPERATING INSTRUCTIONS
Stopping the unit
Stopping the engine
1. Lower the attachment until it is resting on the ground.
2. Set the safety lever backward (LOCK position).
3. Set the engine speed lever to low idle position and let
the engine run for about
5 min
.
NOTICE:
run the engine in idling for about
5 min
.
Stopping the engine immediately after operating may
cause a failure such as the engine seizing. Stop the
engine after the engine temperature has dropped.
NOTICE:
make sure to run the engine in idling status
before completely stopping it except for emergency.
4. Turn the starter key to the OFF position.
5. Remove the starter key to prevent other people using
the machine.
SMIL19MEX0773AA
1
Emergency stop of the engine
Only in case of emergency the engine can be stopped by
operating the switch
(1)
located on the left-hand side of
the cab, next to the windshield washer reservoir.
1. Lift up the red toggle
(1)
.
2. Operate the switch
(2)
upwards.
SMIL16MEX0912AA
2
SMIL16MEX0644AA
3
4-20
Summary of Contents for E26C
