6 - MAINTENANCE
2. Release the two fasteners
(2)
and remove the cover
(3)
of the air cleaner
(1)
.
SMIL16MEX0916AA
3
3. Remove the primary element
(4)
.
4. Clean the primary element
(4)
.
SMIL16MEX0917AA
4
When the primary element is dry:
Blow compressed air at very low pressure from the in-
side to the outside.
Hold the compressed air nozzle at a position at least
3 cm
(
1.181 in
) away from the inside wall of the ele-
ment. When no more dust comes out of the primary
element, cleaning is complete.
NOTE:
be sure to keep the compressed air pressure below
3 bar
.
SMIL14CEX2795AA
5
NOTE:
do not use compressed air if there is oil or soot in
the element.
If the cartridge is greasy:
Clean it in water, with suitable detergent. (Consult your
NEW HOLLAND CONSTRUCTION dealer).
Instructions for using the detergent are printed on the
package.
NOTE:
dry the element out completely before installing it.
It is advisable to keep a clean spare element ready that can
be installed on the air cleaner while the cleaned element is
drying.
SMIL13CEX2757AA
6
6-45
Summary of Contents for E26C
