6 - MAINTENANCE
Pilot line filter
Replace the pilot line filter after the first
250 h
, then re-
place the pilot line filter every
1000 h
.
To replace the pilot line filter perform the operations de-
scribed on page
6-50
NOTE:
replace the pilot line filter every
200 h
of service if
hydraulic breaker is used continuously.
Travel reduction gears
Replace the travel reduction gears oil after the first
250 h
, then replace the travel reduction gears oil every
1000 h
.
To replace the travel reduction gears oil perform the
operations described on page
6-52
Boom swing cylinder
Grease the boom swing cylinder after the first
10 h
,
within the first
50 h
, then grease the boom swing cylin-
der every
250 h
.
To grease the boom swing cylinder, refer to page
Boom
swing cylinder
.
6-19
Summary of Contents for E26C
