INTRODUCTION
ELECTRICAL EQUIPMENT
1. The disassembly of electrical equipment is not allowed.
2. Handle equipment with care so as not to drop it or bump it.
3. Connector should be removed by unlocking while holding the connector.
Never stress in tension to the caulked section by pulling wire.
4. Check that connector is connected and locked completely.
5. Engine key Off before removing and connecting connector.
6. Engine key Off before touching terminals of starter and alternator.
7. Remove battery grounding terminal before beginning work close to battery and battery relay with tools.
8. Wash machine with care so as not to splash water on electrical equipment and connector.
9. When water has entered in the waterproofed connector, the removing of water is not easy. So check the removed
waterproofed connector with care to protect it from entry of water. If moisture adheres on it, dry it completely before
connecting.
WARNING
Battery acid causes burns. Batteries contain
sulfuric acid.
Avoid contact with skin, eyes or clothing. An-
tidote (external): Flush with water. Antidote
(eyes): flush with water for 15 minutes and
seek medical attention immediately. Antidote
(internal): Drink large quantities of water or
milk. Do not induce vomiting. Seek medical
attention immediately.
Failure to comply could result in death or se-
rious injury.
W0111A
HYDRAULIC PARTS
O-ring
• Check that O-ring is free from flaw and has elasticity before fitting.
• Even if the size of O-ring is equal, the usage differs, for example in dynamic and static sections, the rubber hardness
also differs according to the pressure force, and also the quality differs depending on the materials to be seated.
So, choose proper O-ring.
• Fit O-ring so as to be free from distortion and bend.
• Floating seal should be put in pairs.
Flexible hose (F hose)
• Even if the connector and length of hose are the same, the parts differ according to the withstanding pressure. Use
proper parts.
• Tighten it to the specified torque, and check that it is free from twist, over tension, interference, and oil leak.
47488366A 13/03/2013
11
Summary of Contents for E75CSR
