New Holland LW270, Service Manual

Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)

0 - 7

LW270

Ensure that the attachment is safely resting on to the ground before repairing,adjusting, or servicing
machines fitted with hydraulically, mechanically or cable controlled attachments (such as excavators,
loaders, dozers, scrapers, etc.). Should it be necessary to partially or fully raise the hydraulically,
mechanically, or cable controlled attachment  to gain access to certain items, make sure the attachment
is adequately retained in the raised position by means other than the hydraulic lift cylinders, cable and/or
mechanical devices used for controlling it.

 WARNING

SAFETY RULES

For the decommissioning of the machine, the
availability of particular tooling (hoists, hydraulic
presses. containers for liquids etc.) is required as
well as specific tools listed in the Repair Manuals,
available from 

NEW HOLLAND CONSTRUCTION

Dealers.
This has the purpose of avoiding that during
disassembly operations, dangerous situations may
arise both for the personnel involved and the
environment.

In the machine are present:

•

Fluids under pressure (hydraulic system, cooling
system etc.)

•

Gases (air conditioning system and accumulator, if
installed)

•

Mechanical devices mounted under pressure
(track tensioner etc.)

•

Heavy machine components (frames, blades,
buckets etc.)

DECOMMISSIONING THE MACHINE

•

The decommissioning of the machine must be
performed exclusively by personnel trained,
qualified and authorized to perform such
operation.

•

Start the disassembly of hydraulic
components only after the same, the hydraulic
oil and lubricants have fully cooled-off and
after all residual pressures have been
released, as described by the Repair
Instruction Manual.

•

Prior to proceeding with disassembly
operations, comply with the 

GENERAL

SAFETY RULES 

and drain each components

of the machine filled with fluids, both in the
reservoirs and the relevant systems.

WARNING