Engine - Engine and crankcase
Engine - Install
DANGER
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply will result in death or serious injury.
D0076A
1. Refit the flexible belt on the alternator and take up the
slack according to the procedure in
Alternator - Ten-
sion adjust (55.301)
.
2. Reposition the compressor and the relevant belt follow-
ing this procedure:
– Reposition the compressor on the support and with
the related tube support. Secure the compressor with
the screws.
– To mount the polyv belt, use the special tool
380200011
.
(1)
approximately. Compressor clutch actuator drive
bracket.
(2)
approximately. polyv belt pulley outer edge.
(3)
approximately. Tool recess. Used to drive the tool.
This recess houses the bracket
(1)
.
(4)
approximately. Tail. Used to drive the polyv belt in
the pulley seat.
(5)
approximately. Hitching. Thanks to this recess,
where the outer edge
(2)
is housed, the tool remains
hitched to the compressor.
WLAPL4S10C101C
1
47878245 08/06/2015
10.1 [10.001] / 12
