- 32 -
www.NewLeader.com
(800) 363-1771
307369-AA-G
L3030G4 CNH
Header
Figure 5A (uninstalled)
Figure 5B (shown installed)
View from rear of unit.
Figures 5A-5B - Visually make sure insert is centered from side to side in main bin and rear pads are
resting on main bin.
Figure 6
Figure 7
Figure 6 - There must be contact between rear pads and main unit. Check for contact by trying to slide
paper between pads and main bin. If no contact, adjust insert.
Figure 7 - Inside main unit, locate front pads by lifting rubber sealers on front endgate.
Figure 8A
Figure 8B
Figures 8A-8B - There must be contact between front pads and main bin. Check for contact by trying to
slide paper between pads and main bin. If no contact, adjust insert.
NOTE: Pry insert at mount brackets if necessary.
Insert Installation
