P l e a s e G i v e P a r t N o . , D e s c r i p t i o n a n d U n i t S e r i a l N o .
HIGHWAY EQUIPMENT COMPANY
30
97373-A
Page Rev. A
INSTALLATION INSTRUCTIONS CONTINUED
Reusable Non-Skive Type Ends
Step 1
Cut hose to length required using a fine tooth hacksaw or cut-off
machine.
Clean hose bore.
Step 2
Liberally lubricate hose cover with hose assembly lube.
Place socket in vise and turn hose into socket counterclockwise until it
bottoms.
When assembling long lengths of hose, it may be preferred to put hose
in the vise just tight enough to prevent from turning, and screw socket
onto the hose counterclockwise until it bottoms.
Step 3
Liberally lubricate nipple threads and inside of hose.
Use heavy weight oil.
Step 4
Screw nipple clockwise into socket and hose.
Leave 1/32" to 1/16" clearance between nipple hex and socket.
Disassemble in reverse order.
Used with permission of the Aeroquip Company
WARNING
Do not use one manufacturer's hose with another manufacturer's fittings.
Such use will void any warranty and may cause premature burst or leak of
hydraulic fluids! Severe injury and/or fire could result!
Summary of Contents for L2020G4
