72
www.NewLeader.com
(800) 363-1771
307074-AA-I
L4000G4
Spinner Fins
Visually inspect spinner fins daily for build-up of
material and wear. Spinner discs and fins must
be kept clean and polished� Even a small build-
up of material on a spinner can significantly
affect the spread pattern� Rough, bent or worn
fins will produce poor spread patterns. Replace
worn fins and discs as needed. See Fin Kit
Installation Instructions for replacement part
numbers and instructions�
Spinner Deflectors
Visually inspect spinner deflectors daily for build-
up of material and damage� Clean as needed�
Even a small build-up of material on a spinner
deflector can affect the spread pattern. If
damaged, bent or otherwise, replace� See parts
manual for replacement part numbers�
Material & Hillside Flow Dividers
Visually inspect material divider and hillside
flow dividers (as equipped) daily for build-up
of material and wear� Any build-up of material
on divider components can affect performance�
Clean as needed� Replace worn or damaged
parts as necessary� See parts manual for
replacement part numbers�
Figure 4 - Spinner Fin
Figure 5 - Spinner Deflector
Figure 6 - Material Divider
Lubrication & Maintenance
