- 9 -
L5034G4 AGCO
www.NewLeader.com
(800) 363-1771
306375-AA-E
Operations
PREPARE FOR EMERGENCIES
Figure 1.2 - Be prepared if a fire starts. Keep a fully charged fire
extinguisher and first aid kit in accessible place on the vehicle at all
times�
Fire extinguisher must be Type ABC or Type BC�
Keep emergency numbers for doctors, ambulance service, hospital
and fire department available at all times.
Figure 1�2
General Safety Rules
INSPECT HARDWARE BEFORE USE
Figure 1�3 - Inspect all bolts, screws, fasteners, keys, chain drives,
body mounts and other attachments periodically� Immediately
replace any missing or damaged parts immediately with proper
specification parts.
Inspect spinner fins, spinner frame mounting and spinner fin hardware
daily� Look for missing or loose fasteners, wear and cracks� Replace
immediately if needed� Use only new SAE grade 5 or grade 8 screws
and self-locking nuts�
Tighten all bolts, nuts and screws to specified torques. Refer to
“Standard Torques” in Maintenance section of this manual�
Figure 1�3
HANDLE FLAMMABLE MATERIALS SAFELY
Figure 1�4 - Handle fuel and hydraulic oil with care� They are highly
flammable.
Always stop the engine before refueling machine or filling hydraulic
reservoir�
Never smoke while adding fuel or oil to machine. Add fluids in a safe
place away from open flame and sparks.
Do not allow overflow. Clean up spilled fuel and oil immediately.
Figure 1�4
Always have a multipurpose dry chemical fire extinguisher filled and available during machine
operation and when adding fuel� Know how to use it�
