SM1733
22
FURTHER INFORMATION ON THE TIMED PROGRAM OF THE ELECTRONIC MODEL
■
type of fabric
■
degree of drying required
■
degree of dampness of
the washing. (It is recom-
mended that an appli-
ance of spin speed of at
least 800/1000 or a sepa-
rate spin drier is used).
Note
Cotton/linen, for example un-
derwear, handkerchiefs, table-
cloths, sheets.
Synthetics: for example, un-
derwear, nylon, dralon,
terlenkja, etc.
USING THE APPLIANCE
To change the program,
rotate the programmer
knob to STOP.
CHANGING PROGRAM (ELECTRONIC MODEL)
Set the new program.
The program must also
be reset if the door has
been opened during a
drying cycle.
END OF PROGRAM (ELECTRONIC MODEL)
DAFTER THE END OF A PROGRAM (ELECTRONIC MODEL)
USING THE MECHANICAL MODEL
At the end of the drying pro-
gram, the indicator light will
flash for a short time and an
audible signal will be emitted.
The drier has an automatic
■
Remove the plug from the
mains socket or switch off
the power supply.
■
Pull the filter upwards.
■
Open it and clean using a
soft brush Then replace it.
■
In addition to cleaning af-
ter each drying cycle, the
filter must also be washed
regularly with soapy wa-
ter to remove any dust.
This will greatly improve
the efficiency of the drier.
NOTE: The required drying
time depends on:
■
weight and thickness of
the fabric;
■
Size of the items;
■
type of fabric;
■
degree of dampness of
the washing.
GB
anti-crease function to prevent
the washing from creasing.
WARNING: Before removing
the washing from the drum,
rotate the programmer knob to
STOP, remove the dry washing
from the drum and then press
the ON/OFF button.
The drum light and the indica-
tor light will both switch off.
5,0 kg
2,5 kg
2,5 kg
Cotton/Linen
Fabric
Times in minutes
Cotton/Linen
Dry button
Weight of dry
washing
50-80 min.
30-50 min.
Wardrobe
dry
Iron dry
Slightly
damp
60-100 min.
40-60 min.
80-120 min.
50-80 min.
60-100 min.
ENERGETIC PROGRAM SECTION
Syntheti cs
Resistant
Summary of Contents for 251CO
Page 1: ......
Page 63: ...SM1733 63 NOTES...
