Configuring the MX100-TG
MX100-TG User Manual
34
Table 3: Digit Map Usage
Setting
Description
x
Any number ranged from 0- 9
“.”
Represents any multidigit number ranged from
0- 9
x.T
The MX100-TG allow a phone number of
random length comprised of digits 0-9. If within
the time specified (see "Critical Digit Timeout"
on page 27) no new digit has been received,
the gateway will send out the dialed number
x.#
If after the entry of a phone number of random
length comprised of digits 0-9 the ”#” key is
pressed, the number will be sent.
[2-8]xxxxxx
A seven digit number starting with any number
2-8 will be sent
Table 3: Digit Map Usage
Setting
Description
91x
A three digit number starting with 91 which
is used to finish an emergency call
911
Send the number 911 immediately after
being received.
Routing Table
The Routing Table (shown in Figure 9) has two functions in the
MX100-TG, digit translation and routing. Digit translation and
routing can be applied to both directions of a call, either from IP or
from the PSTN. If the Route Table is empty:
y
Calls from IP addresses will select the first available (nonfull)
T1/E1. (1, 2, 3, then 4)
y
Calls from the PSTN will be sent to the IP address configured
in “SIP Proxy” on page 29.
Summary of Contents for MX100-TG
