Shanghai New Rock Technologies Inc. Page46/75
Table 2-18
Configuration parameter of call record
Name
Description
CDR Server
Set the IP address and port number of server for storing call records.
Note: If port number is not configured, the default port number 1809 will
be used.
Filter
Select what calls are not recorded: None or Internal calls.
2.6.6
Functional keys
The function key consists of system function key and service function key. The system function key
is used for acquiring OM information, and the later is used for users to activate, inactivate extension
features.
After login, click the label of “System> Functional Keys” to open this interface.
The following are the examples of the dialing rule for the function key:
a)
Using *xx (dial * and 2 digits number ) to activate a service;
b)
Using #xx (dial # and 2 digits number) to cancel a service.
Illustrate with following defaults of various parameters, which may be modified according to
requirements.
Figure 2-21
Functional keys configuration interface
Table 2-19
The use of feature codes
System Codes
Inquiry of IP address
Pick up the phone on any ext ##
Inquiry of extension number
Pick up the phone of the ext #00
Making Recording of Voice files
Start recording
Pick up the phone of any ext *81 + hang up after
recording
Replay
Pick up the phone + *82
