© New Scale Technologies, Inc. MPM System Manual, June 9, 2017
P a g e
|
14
MPM-4 DOF Arm-Inverted continued… Assembly of M3-LS-3.4-15-XYZ
1.
Mount the
M3-USB-3:1-6V
adapter to the
MPM-4 DOF Arm-Inverted
.
Standoff assemblies with grommets are provided to mount the
M3-USB-3:1-6V
adaptor. These
standoffs can be mounted to the
MPM-4 DOF Arm-Upright
assembly or any standard 1” x ¼
-20
optical breadboard table.
The recommended location is shown. Secure the grommet standoff assemblies to the
MPM-4
DOF Arm-Upright
assembly using the provided hex wrench. Install the
M3-USB-3:1-6V
adapter
by sliding the grommets into the slots on the back of the
M3-USB-3:1-6V
adapter so that that X,
Y & Z-axis ports face upwards.