19
3) Check that the voltage printed on the label of the pump power adapter, and on the heater and air-pump when present,
matches the one of the power supply.
4) Do not insert the plugs of the power supply cables before completely filling the tank with water.
5) Check that all the electrical accessories have no knocks or marks indicating falls or crushing.
6) Check that the power supply cable of the accessories is not damaged. The cable cannot be repaired or replaced. If it is damaged,
the entire unit will need to be replaced.
7) The power supply cables should be inserted in the socket so that a part of the cable forms a loop at a lower level than the
socket. This will prevent water droplets from entering the socket (Fig.2) by running along the cable.
8) Always disconnect the plugs when the aquarium is not in use, before inserting or removing its components and before
cleaning. Do not try to disconnect the power adapter from the socket or the plugs of the other appliances by pulling the cable,
but disconnect it by hand.
9) Do not touch the power plugs with wet hands or touch the plugs with your bare hands if they are wet.
10)
NMO 30R - WARNING:
the air-pump should only be used by inserting the CHECK VALVE onto the connecting hose with the
porous wood element. This will prevent the tank from emptying in the event of a power failure, even for a few minutes, thus
preventing water from coming into contact with the electrical parts of the air-pump.
11) If the aquarium is within children’s reach, take special precautions and check correct installation and operation several times.
12) The maximum water temperature conveyed from the pump must not exceed 35°C.
13)
WARNING
: the symbol indicates that the electrical appliances must only be used in homes.
14) The aquarium must not run dry.
15) The aquarium has glass components. Handle it with care and position it according to the instructions given in this manual,
avoiding placing the tank directly on its edges.
16) Do not place the aquarium on tilting surfaces.
17) After installation, do not move the aquarium. If necessary, only move it if the tank is completely empty.
18) Each component is an integral part of the aquarium and must not be used with other products.
19) Do not use the aquarium for food use.
20) Do not use the aquarium as a terrarium.
21) Do not use the aquarium if it is damaged and /or dismantled.
22) Do not damage and/or remove the seal on the couplings of the glass panels of the tank.
23) Do not place rocks, stones or other heavy ornamental elements directly on the bottom of the tank.
24) Do not position any objects on the aquarium.
25) It is important for the aquarium, just like all other electrical appliances, to be protected upstream by a special differential
safety switch (safety cutout) with a trip current of Idn < 30 mA.
26)
IMPORTANT
: these UVC filters must not operate immersed in water. If they should accidentally fall into it, before recovering
them, disconnect the plugs from the power supply socket. Take the same care if you should notice that any parts of the appliance
are wet.
27)
IMPORTANT
: the appliances are not intended to be used by people (including children) with reduced physical, sensory or
mental abilities, or lack of experience or knowledge, unless they have been given, through an intermediary responsible for their
safety, supervision or instructions concerning the use of the appliances.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
II. PRODUCT SPECIFICATIONS
II.a Component names (Fig. 2)
1) Tank
2) Edge seals (for glass panels)
3) Raised base
4) Heater lid and/or skimmer collection cup coupling (versions NMO30, 30R, 50)
5) Heater housing
6) Heater
7) Filtering area lid (versions NMO 20 and NMO 30)
UK