9
INSTALLATION
•
This fridge is designed for freestanding installation in a dry, well-ventilated
room.
•
WARNING: placing beverages up against the back panel of the fridge could
cause cans or bottles to rupture due to excessively low temperatures.
Always allow room for air circulation between the back panel and any
drinks.
•
WARNING: Do not store or install the appliance outdoors.
•
CAUTION: This appliance is designed for storing and cooling beverage or
wines. Do not store perishable food, medicine or other medical products.
Do not overcrowd the inside of the fridge.
•
Place your appliance on a hard and level floor that is strong enough to
support it when it is fully loaded.
•
To level your appliance, adjust the leveling legs at the bottom of the
appliance if needed.
•
Allow of at least 5 inches (127mm) of space between the back and sides of
the appliance, for proper air circulation to cool the compressor and
condenser.
•
Do not install the appliance on carpet.
•
Do not install the appliance near an oven or other heating source. Direct
sunlight may affect the acrylic coating, and heat sources may increase
electrical consumption. For best performance, do not install the appliance
behind a cabinet doo or under a countertop.
•
Avoid extremely hot or cold ambient temperatures, as they may cause the
fridge to perform poorly. Install only in areas with ambient temperatures
between 60°F and 90°F
•
Avoid placing the fridge in an area where it may be exposed to water or
excess moisture.
•
Plug the fridge into its own grounded wall outlet. Do not, under any
circumstances, cut or remove the third (ground) prong from the power cord.
Any questions concerning power and/or grounding should be directed
toward a qualified electrician or customer service.
