Setting Up The Unit
Sleep Setup
26
Allows the user to select a time period where the unit will automatically go into Sleep Mode. If no move-
ment is made or keys pressed for the time period set, the sleep mode will be activated.
Example:
The sleep time is required after 5 minutes
Unlock Axis
Allows the unit to be upgraded from a 2 or 3 Axis unit up to 4 Axes. Please contact your local
authorised Newall distributor to purchase this option.
Contact Newall to progress further
Reset Setup
Allows the user to reset the unit back to factory defaults.
There are three factory default settings according to the application.
Example:
The unit is being reset as a
Lathe
.
To default as
Mill
To default as
Lathe
To default as
Generic
Note:
When the DP1200 is setup as a Lathe, the ‘X‘ (top) Axis default setting is DIA, therefore the ‘X’
(top) Axis will display double.
OEM Defaults:
The DP1200 may have OEM default settings specific to a machine. In this case, the
DP1200 will only display one reset option. This reset will default all the parameters to match the OEM
defaults set for the machine when the DRO was originally installed.
Note:
To deactivate this feature, enter a value of “0” (default)
Summary of Contents for dp1200
Page 1: ...User Manual DP1200 Digital Readout...
Page 2: ......
