37
Line Hole
Mill Functions
The DP1200 calculates positions for a series of equally spaced holes on a line. Once the parameter
data is entered, the DP1200 displays the distance to the next hole. The operator works to zero for each
hole location. See example (
Fig 2
).
Note:
This function only operates in the axes that have been setup in the plane (See Page 24 - Plane
Setup)
.
To select
Line Hole
Example
Enter 1st start
coordinate
Enter 2nd start
coordinate
Enter the line hole length dimension
Enter the number of holes required
Enter angle required in degrees
Note:
Length = total length of line hole sequence, not distance between
adjacent holes.
Note:
At this point you can use the
keys to navigate back and forth through the menus.
Summary of Contents for dp1200
Page 1: ...User Manual DP1200 Digital Readout...
Page 2: ......
