Lathe Functions
Tool Offsets
44
The Tool Offset function allows the operator to enter and store offsets for a range of tools. This
enables the operator to change tools without resetting absolute zero or datum. Using Tool Offsets
ensures that diameter and length measurements will remain consistent after tool changes. This
speeds up tool changes and increases productivity as it eliminates the need for the operator to stop
and manually measure the diameter.
The number of Tool Offsets available is 50. This large number allows tools to be grouped where more
than one set is used. For convenience, it is highly recommended that tools are physically marked with
their corresponding tool number.
There are two ways to set Tool Offsets, Teach Mode and Program Mode.
The DP1200 provides capability for Tool Offsets for up to 3-axes. A 3 or 4 axes DP1200 is required to
use 3-axes of Tool Offsets.
DP1200 Tool Offsets are all in reference to the datum.
To select
Tool Offsets
To select
Teach Offsets
To select
Program Offsets
Teach Offsets
[------]
[------]
[------]
9.900
Enter the tool dimensions one axis at a time. In this example, the “X” axis of Tool 1 is entered.
Take a skim cut if “X” is selected. Take a
face cut if “Z” is selected.
The axis window shows the size of the
tool with respect to the datum.
Note:
The tool can now be moved away
from the part
of the required axis
Summary of Contents for dp1200
Page 1: ...User Manual DP1200 Digital Readout...
Page 2: ......
