6.2 Error Codes and Their Descriptions
Code
Descriptions
Er05
Battery weak or faulty
Er06
Output short-circuited
Er07
EPO mode
Er11
UPS over-temperature
Er12
Inverter overload
Er14
Fans out of order
Er18
EEPROM's data error
Er24
Utility Low <85/170V
&
Battery
Disconnect
Er28
Bypass overload
Er31
EEPROM's data not conform to the Jumper
Setting
7 Bundle Software Installation Guide
7.1 Hardware Installation
1. Connect the male connector of RS232/USB* cable to the UPS communication port.
2. Connect the female connector of the RS232/USB* cable to a dedicated RS232 port of the
Computer.
3. For optional interface cards, please refer to Chapter 9 for more details.
*Note: Only RS232 cable is provided with the UPS. USB cable is optional
Summary of Contents for 1000-3000VA
