TABLE OF CONTENTS
1 Standard Unit Installation Guide 4
1.1 Important – Please read carefully prior to installation 4
1.2 Storage Instruction 4
2 Product Introduction 5
2.1 General Characteristics 5
2.2 Special Features 5
3 UPS Functional Descriptions 6
3.1 UPS Front Panel Display Descriptions 6
3.2 Real Panel Descriptions 7
3.3 Operating Modes & Voltage System Configurations 8
3.3.1 System Configuration Settings 8
3.3.2 Programmable outlet setting 9
4 Installation and Operation 10
4.1 Unpacking 10
4.2 Selecting Installation Position 11
4.3 Tower Configuration Setup 12
4.4 Rack-Mount Configuration Setup 14
4.5 Operation 16
4.5.1 Start Up in Normal AC Mode 16
4.5.2 Start-up in Battery Mode (Cold Start) 16
4.5.3 Shutdown 16
4.5.4 Self Testing during AC mode 17
4.5.5 Status & Alarm Buzzer 17
4.5.6 Battery Replacement 18
5 UPS Working Principle 20
5.1 UPS System Block Diagram 20
5.2 When Utility is Normal 21
5.3 When Utility is Abnormal/Absent 21
5.4 Overload Condition 22
5.5 Inverter Failure 23
5.6 Inverter/Internal Over temperature 23
5.7 Inverter Over-current and Inverter Output Voltage Out of tolerance 23
6 Maintenance Guide 24
6.1 Trouble Shooting 24
6.2 Error Codes and Their Descriptions 26
7 Bundle Software Installation Guide 26
7.1 Hardware Installation 26
7.2 WAVEMON Shutdown and Management Software 27
7.2.1 Why is UPS Management important? 27
7.2.2 Wavemon Shutdown and Monitoring Software 27
7.3 SNMP CARD/ADAPTER For Network Management /Remote Monitoring 29
8 Communication Port Explanation 30
8.1 True RS232 Port Descriptions 30
8.1.1 USB Port Descriptions 31
8.2 The Pin assignments of the EPO Input port are: 31
9 Optional Communication Cards 31
9.1 AS400 (Dry Contact) card 31
9.2 SNMP Cards 32
10 Battery Bank Installation 33
10.1 Chapter 1: Important Safety Instructions 33
10.2 Chapter 2: Introduction to the Front and Rear Panel 34
10.2.1 Front and Rear Panel Descriptions 34
Summary of Contents for 1000-3000VA
