Newave_OPM_PV11_PV31 _GB_250805.doc Installation
Page 17
3.6.21 Output Cabling
To achieve correct Output Cabling see Terminal Block in Figure 3.
For output cabling connect output cable to UPS Terminal according to following Output to UPS
terminal block correlation.
OUTPUT CABLE
UPS TERMINAL
Phase L1
3L1
NEUTRAL
3N
EARTH PE
Under the connection terminal of the UPS there is a cable-fixing rail to ensure that the cables have
been fastened properly
3.6.22 How to fix the POWERVALUE to the floor
After having performed the connections screw the terminal cover plate back on the UPS.
Make sure that the earthing wire is correctly connected on the terminal cover plate.
Once the UPS has been brought to its final position it should be blocked by means of the
2 castors
which are situated near the two front rollers of the UPS.