background image

 

 

Newave_OPM_PV11_PV31 _GB_250805.doc   Description 

Page 5 

 

2 Description 

2.1  RELIABILITY AND QUALITY STANDARDS. 

Congratulation on your purchase of the 

PowerValue

TM

The 

PowerValue

TM

 will provide your critical equipment with a steady and reliable power supply for 

many years. 

NEWAVE SA is situated in Switzerland and is specialized in the design and manufacture of 
Uninterruptible Power Supplies. 

The unique and modular UPS 

PowerValue

TM

 belongs to the newest generation of midrange 3phase 

UPS-Systems. High reliability, low operating cost and excellent electrical performance are only some 
of the highlights of this innovative UPS solution.  

The criteria and methods implemented at NEWAVE SA for the design and manufacture correspond to 
the most stringent quality standards.  

The Swiss Association for Quality and Management System (SQS) certified that, according to the 
model of the International Standard ISO 9001/EN 29001, the whole Newave SA company complies 
successfully. (Registration No.: 14879-01, date issued: 12 April 1999.) 

2.2 POWERVALUE 

MODELS 

The 

PowerValue

TM

 UPS series  consists of:  

 
Single Phase Input/Single Phase Output Models: 7.5, 10 and 12kVA  

Three Phase Input/Single Phase Output Models:  7.5,10,15 and 20kVA 

2.3 WARRANTY 

The 

PowerValue

TM

 is supplied with a limited warranty that the UPS and its component parts are free 

from defects in materials for a period of 12 months from the date of original commissioning or 15 
months from the date of original delivery, whichever is the sooner. Transportation cost is not included 
in the warranty and has to be paid by the end-user.  

Do not return anything without written authorisation from NEWAVE or your closest service centre. 
NEWAVE or the closest service centre will then give you further instructions how to proceed. 

Any product must be returned with transportation charges prepaid and must be accompanied by a 
description of the failure. Products without description will not be handled. 

This warranty is invalidated if the UPS is put into use without having been commissioned by a fully 
trained and by NEWAVE authorised person. 

This warranty does not apply to any damage or losses caused by misuse, abuse, negligence, neglect, 
unauthorised repair or modification, incorrect installation, inappropriate environment, accident, act of 
God or inappropriate application. 

If the UPS fails to conform to the above within the warranty period then NEWAVE SA or an authorized 
service centre will, at its sole option, repair or replace the UPS or parts of it. All repaired or replaced 
parts will remain the property of NEWAVE or of the authorized service centre. 

NEWAVE is not liable for any costs, such as loss of profits or revenue, loss of equipment, loss of data 
or software, cost of substitutes, claims by third parties or otherwise. 

As general policy, NEWAVE does not recommend the use of any of its products in life support 
applications where failure or malfunction of the NEWAVE product can be reasonably expected to 
cause failure of the life support device or to significantly affect us safety or effectiveness. NEWAVE 

Summary of Contents for PowerValue 11













































Reviews: