RDY13
User Manual
M12-2753D BLE 5.3k HRM chest belt w/ 3D sensor
Introduction
NEWCO Blutol Heart rate belt using 5.3k RF analog wireless technology is an accessory for
I-phone or other devices with 3D accelerometer motion sensor using BLE 4.0 (Bluetooth Low
Energy version 4.0). It will gather heart rate signals from your body and transmit it to the
phone wirelessly through Bluetooth 4.0 transmission technologies.
Basic parts of the BLUTOL HRM chest belt:
1) Main body (Front)
2) Main body (Back)
3) Strap
Pairing your Heart Rate monitor with the phone
The HRM belt is on standby and ready to send data to your phone. Wear the belt directly on
your skin just below your breastplate. It should be snug enough to stay in place during your
run.
1)
Attach the fabric strap to the main body by snapping the button connectors.
2)
Wet both electrodes with a damp cloth on the back of the fabric strap. This will help
create a strong electrical connection between your chest and the HRM transmitter.
3)
Wrap around the chest belt around your rib cage just below the pectoral muscles and
attach the other end of the strap to the HRM transmitter. The elastic fabric strap should
be adjusted so that it is snug enough so that it will not move during use but not so tight
as to restrict breathing.
