background image

NEWCO ENTERPRISES, INC. 

 * www.newcocoffee.com * www.thermalcarafes.com * 1.800.325.7867 * 

June 5, 2012 

3

 

CAUTION: 

 
It is important to read and follow the instructions very carefully before using KK series of airpots. KK airpots are 

designed to hold hot beverages “hot” and cold beverages “cold”. Do not use for other intended purposes

 

• 

Do not pour boiling water into KK airpot.

 

• 

Cleaning the KK airpot with a cleaner other than recommended cleaner may cause damage to the KK airpot.

 

• 

KK airpot not intended to be used for 

dry ice

carbonated beverages

fruit juices

 or 

dairy products

.

 

• 

Always carry KK airpot by the handle in the upright position.

 

• 

Always pump out liquid thoroughly. Do not pour out liquid by opening the lid and removing stem assembly as it 

may splatter or cause bodily harm.

 

• 

Always keep KK airpot away from children.

 

• 

Keep KK airpot away from heat source.

 

• 

Qualified person should repair KK airpot.

 

• 

Do not transport KK airpot filled with beverage in moving vehicle.

 

• 

Never carry KK airpot when lid is in open position, always close it with brew-thru stem in place before moving it.

 

• 

Never hold lid assembly or the spout while transporting. Always close the lid before transporting.

 

 

HOW TO USE: 

 

Brewing Coffee 

 

1.  Press down on the lid-locking button and while holding it down, lift the lid upward until it is fully opened and rests 

on backstop. 

2.  To get better thermal efficiency, pre-heating of the vacuum liner is necessary. Rinse the KK airpot with warm 

water and then discard water. 

3.  KK airpot has a brew-thru stem and it is not necessary to remove the brew-thru stem for brewing coffee into the 

KK airpot. 

4.  Position KK airpot under the brew basket. Brew coffee as per manufacture’s instructions. 
5.  After finished brewing, remove KK airpot from the brewer and close the lid by pressing down on the lid. It will 

automatically lock the lid. 

 

Dispensing 

 
After closing the lid, KK airpot can be transported to any desired location for serving coffee. Make sure to use the handle 
while transporting. 

 

1.  Lift the dispensing lever in the “up” position by lifting it from the front until it locks into the dispensing position. 

2.  Position your cup under the spout and slowly press down on lever. You can control the speed of dispensing by 

controlling pressure on dispensing lever. 

3.  If your cup is not filled, you may press down on dispensing lever again until cup is filled. 
4.  If you wish to transport KK airpot to another location for serving coffee or cleaning, make sure to have dispensing 

lever in down position. To bring down the dispensing lever, simply push back on the protruding locking latch and 
the dispensing lever will fall down in rest position. 

 
 

 
 

 
 

 
 

 

Summary of Contents for KK airpot









Reviews: