11
LOCKING COVER:
1. Remove bracket “L” and bracket “R” by removing the mounting screws.
2. Remove the 3 “U” nuts from the locking cover upper section by spreading the nuts enough to clear their
mounting hole and pulling them off.
3. To remove the locking cover upper section from the locking cover lower section, remove the 5 mounting
screws and pull the covers off.
BACK COVER:
1. Remove mounting plate “C” with attached circuit board and unplug the power cord.
2. Remove the coin box support by rotating it clockwise.
3. Remove connecting plate “A” from the back cover by removing the 8 mounting screws.
4. Remove the connection plate “B” by removing the mounting screw.
Locking Cover
Back Cover
