6
6. Grasp the door handle of the same color as the button that was pushed and move the door to the left until
the door stops.
7. Reach in and retrieve the product.
8. After removing the product, close the door by moving the door all the way back to the right.
Removal of Major Components
1. Unlock the front cover by inserting the key into
the lock and rotating it 1/4
th
turn clockwise.
2. Remove the front cover by pressing in on
the lower right corner of the cover has proper
clearance for removal. Lift the front cover from
the vendor and set it aside.
*See Figure 7
*Note that the front cover can be stored by
setting it on the back cover during route
servicing.
3. Rotate the carousel by grasping the rotation ring
of the carousel and rotating it until one of the
three 120-degree segments of trays is centered
in the service opening.
4. Grasp the horizontal slot in the center of the top
tray and lift the segment out of the vendor. Set
the segment of trays on a flat surface and
telescope all four trays down to one level.
*See Figure 8
5. Remove the coin box by rotating the coin box
counter-clockwise and aligning the “Remove-
Install” arrow on the coin box with the
reference arrow below. Pull the coin box out
horizontally and set it aside.
*See Figure 9
Fig 7
Fig 8
Fig 9
