background image

 

  

2.  OVERVIEW

 

 

 

The night vision BN-5 is observational optico-electronic 

binoculars, intended for examining objects and orientation at nighttime 
or dark conditions.  The unit utilizes 2 (two) image intensifiers which 
amplify available moonlight, starlight or man-made light.  The 
binoculars were designed to be easy to use, and provide many years of 
operation. 

 
Some of the typical activities where the BN -5 Night Vision 
Binoculars will be useful: 

 

• 

Law enforcement 

• 

Wildlife observation 

• 

Security 

• 

Search and rescue  

• 

Hunting 

 

 

 

Features

 

 

• 

Built-in Infra Red illuminator allows observations in total darkness 
(i.e. basement, cave or dark room); 

• 

2 (two) image intensifiers, one for each eye; provides stereo vision; 

• 

Independently adjustable eyepieces; 

• 

Inter-pupilary distance adjustment;  

• 

Lightweight and comfortable; 

• 

Soft rubberized eye pieces makes the viewing more comfortable; 

• 

Water-resistant 

• 

Works on standard AA batteries. 

 
 

 

 

 

 
4

  

 
 

6.3 Operation at Night

   

 

Take off the lens covers (7) from the lenses (6).  Turn on the 

device by pushing and holding switch (4).  In case of insufficient 
lighting when observing an object, which is situated not far from 
the viewer, turn on the I/R illuminator by pushing and holding 
switch (3).  When the I/R button is released the I/R illuminator will 
turn off.   
 

Note:

  The illuminator will be activated only if the unit has 

been already switched on by switch (4). 

Note: 

When looking directly in front of the binoculars 

operational illuminator appears as a red dot, a size of a lit cigarette. 
The illuminator can be also detected using night vision device. 
Therefor, if you need to remain undetected, use the illuminator with 
caution. 

 
If brightness of the screen is decreasing, replace the batteries. After operation the 
unit will automatically turn off after few minutes, till the complete discharge of 
the units power.  Put protective lens caps on the lenses.  This feature can be used 
to economically utilize the battery’s power by periodically switching on and off 
the device during operation. After operation remove the battery from the battery 
compartment to avoid any damage of the device in case of occasional leakage of 
electrolyte from the battery.

 

 

 

7. TROUBLESHOOTING

 

The binoculars do not work

.

 

Check if the battery is installed properly. 
Check the charge of the battery. Replace if it is weak.

 

The image does not appear in focus. 

Bring the inspected object to the center of the image. Turning the 

eye-pieces (5) adjust to achieve the clearest image on the screen.  
Repeat the

 

steps of focusing if necessary 

 
 
 

9

 

 
 

Reviews: