background image

   Adjust the ocular to your eye sight,

rotating the dioptric adjustment ring  .

    Point the unit towards the object of

your surveillance.

     

 

 

NEVER DIRECT THE LENS IN

THE DIRECTION OF BRIGHT LIGHT

  

For maximum performance focus in on

your object by rotating the focusing ring on
the objective lens.

  

For IR operation: depress fixated button IR illuminator , keeping the button depressed move it in to

IR “ON” position.   At this stage the Yellow light indicator light will come on the top portion of the ocular.

  

After the operation make sure that the unit is turned OFF,  by moving the switch to OFF position on

the unit.

  

  

 Close the objective cover.

OPERATION INSTRUCTIONS

 (con’t)

15

Precautions

Never disassemble the unit by yourself.

There are no wires or modules that requires user to clean or modify.

Operation procedures

   Twist off the battery house cap.

   Insert one battery type «ÀÀ»  1.5V,  make sure that polarity

is correct..

• 

   Screw the battery cap back on.

    Take the unit into your hand. Put on the wrist wrap.

   Take the protective cover off the objective lens.

    

  

NEVER OPERATE YOUR NIGHT VISION DEVICE IN DAYLIGHT WITH-

OUT THE LENS COVER ON

  

  

Turn ON the unit,   by moving the position of the switch to (

ON

).

The Green Indicator light will come on and will be visible at the top portion of the ocular

OPERATION INSTRUCTIONS

14

Summary of Contents for NIGHT VISION MONOCULAR














Reviews: