background image

11 

 

9. WARRANTY 

NEWCON

 warrants this product against defects in materials and 

workmanship for one year from the date of the original purchase, but no 
more than 12 months from the date of manufacturing. Longer warranty is 
available, subject to the terms of the specific sales contract. Should your 
Newcon product prove to be defective during this period, please deliver 
the product securely packaged in its original container or an equivalent, 
along with the proof of the original purchase date, to your Newcon 
Dealer.  
Newcon will repair (or, at its option, replace with the same or 
comparable model), the product or part thereof, which, on inspection by 
Newcon, is found to be defective in materials or workmanship

 

 

What This 

Warranty Does Not Cover

:

 

NEWCON is not responsible for warranty service should the product fail 
as a result of improper maintenance, misuse, abuse, improper 
installation, neglect, damage caused by disasters such as fire, flooding, 
lightning, improper power supply, or service other than by a NEWCON 
Authorized Service.  
Postage, insurance and shipping costs incurred while presenting your 
NEWCON product for warranty service are your responsibility.  
If shipping from North America please include a cheque or money order 
payable to NEWCON OPTIK for the amount of $25.00 to cover handling 
and return shipping.

 

Summary of Contents for NVS 22-2XT

















Reviews: