12
Mounting on a rifle
The unit can be mounted on a rifle with a Picatinny mount
adapter (MIL-STD-1913). The optical axis of the monocular
caligns with the rifle’s Picatinny rail.
Two types of weapon mount adapters are available – Fig.4 and
Fig. 5. Either adapter enables mounting the unit to the Picatinny
rail. The type shown on Fig. 4 has two screws with large grooved
heads for convenient tightening.
Note: Over tightening the screws may damage the thread.
The ‘Quick Release’ model (Fig. 5) utilizes a latch with a spring
and patented accu-torque screw. You can attach and detach your
monocular within a few seconds. The accu-torque screw fixes the
mount with predefined torque thus protecting the thread from
accidental damage caused by over tightening.
FIGURE 4.
TVS 11
with Picatinny adapter
