11
FRAME
1 Unpack the stroller frame from the box
and set the wheels aside
.
Unlock the stroller by pulling the auto-
lock lever
.
2 Unfold the stroller by pulling the
handlebar away from the frame
.
The
stroller will lock into place and you will
hear a click
.
3 Place the stroller in the upright
position
.
WARNING:
Ensure that all the locking
devices are engaged before use
.
FRONT WHEEL
4 Installation
• Lay stroller on its back so the
handlebar is resting on the floor
.
• Attach front wheels by sliding them
into the front wheel mount until it
clicks
.
Gently pull on the front wheel
to make sure it is properly attached
.
5 Removal
• While pressing the front wheel release
button, gently slide the front wheel out
of the front wheel mount
.
SWIVEL FEATURE
6 Push the swivel button down and
rotate to the left to lock the front wheel
assembly in a fixed position for long
distance strolling.
7 Push the swivel button down and
rotate to the right to allow the front
wheel assembly to swivel.
WARNING:
When loading and
unloading child, lock the front wheel
in a fixed position
.
Although the
front wheel of your stroller locks, it is
not intended for jogging or exercise
purposes
.
REAR WHEELS
8 Installation
• Align the rear wheel axle with the
wheel mount on the stroller frame and
insert it into the wheel mount until it
locks into place
.
You will hear a click
.
• Gently pull on the rear wheel to make
sure it is properly attached
.
9 Removal
• While pressing down on the wheel
release button, gently slide the rear
wheel out of the wheel mount
.
HANDLE
10 Press the handle release buttons on
both sides and rotate up or down to
the new position
.
BRAKE
11 To Lock the Brakes: gently pull the
Brake Lever into upright position until it
clicks into place.
12 To Release the Brakes: Pinch the gray
tabs and pull the lever towards you.
Push the Brake Lever down until it is
parallel with the frame.
WARNING:
Lock the brakes before
loading and unloading your child and
whenever the stroller is not moving
.
CANOPY
13 Attach the canopy to the frame by
sliding the canopy onto the mounting
brackets
.
To remove, slide canopy off
of mounting brackets
.
NOTE:
When using a Car Seat, canopy
must be removed
.
14 Snap the 3 snaps to the stroller frame
.
15 Attach the fastening strip on the back
of the canopy to the frame
.
16 Pull forward to open canopy and push
backwards to close canopy
.
17 There are two canopy windows, a top
one and back one
.
To use them, roll
the shade up towards the top and
secure with the elastic and button
.
ADJUSTING SAFETY HARNESS
18 From the back of the seat, undo the
fastening strip and open the pocket to
locate the plastic square stopper
.
Turn
stopper and pass through the openings
in the PE board and seat fabric
.
19 Reinsert stopper at seat opening
closest to child’s shoulders
.
Pass back
through seat fabric and PE board
.
Tug
on strap to ensure stopper is locked
.
Repeat on both sides
.
EN
NWL0000982871A City Mini GT2 DOUBLE AUNZ R03 FINAL.indd 11
7/10/19 1:36 PM
