NWL0000746328
COLOR
POP!
Quick Start Guide
Getting Started
The DYMO
®
COLOR
POP!
™
printer uses DYMO COLOR
POP!
D1
cassettes in 1/2” width. Cassettes are available in a wide range of
colors.
For complete information on using your printer, download the
DYMO
COLOR
POP!
User Guide
from
support.dymo.com
.
Registering Your Printer
Visit
www.dymo.com/register
to register your printer online.
During the registration process, you will need the serial number, which
is located inside the back cover of the printer.
Inserting the Batteries
The printer is powered by six AAA alkaline batteries.
1
Press the thumb latch on the back of the printer to remove the
battery compartment cover.
2
Insert the batteries following the polarity markings (+ and –).
3
Replace the battery compartment cover.
Remove the batteries if the printer will not be used for a long period of
time.
Inserting and Removing the Cassette
1
Lift the cassette cover to open the label compartment.
2
Insert the cassette and press firmly until the cassette clicks into
place.
Each time you change the cassette, you will be prompted to choose
the label width.
Using the Printer for the First Time
The first time you turn on the power, you are asked to select the
language and label width settings.
1
Press
to turn on the printer.
2
Select the language and press
.
3
Select the width of the label cassette currently in the printer and
press .
To Print a Label
1
Enter text and format to create a custom message.
2
Press .
3
Press the cutter button to cut the label.
4
Remove the backing from the label to
expose the adhesive, and then stick!
Press thumb
latch to open
Split backing
