5
Usage Instructions
Attaching to Your Computer
Connecting
Voyager
to a Macintosh or a Windows computer is a very straight-
forward procedure.
1. Plug the AC power cord into the wall and into the DC transformer.
2. Plug the DC cord into the
Voyager’s
power receptacle.
3. Connect
Voyager
to your computer via one of the two available connections
supported by your computer: eSATA, or USB 2.0.
Attaching a Drive
1. Make sure
Voyager
is turned off by pressing the power button until the blue
power LED is
not
illuminated.
2. Insert your SATA hard drive into the base, as shown below.
3. Press the Power Button to turn
Voyager
on.
3.5” SATA Drive
2.5” SATA Drive