2
Chapter 2 Getting Started
Introduction
This chapter lists the parts and accessories for the DC850 and explains how to install, remove and charge the battery, and
power on the DC850 for the first time.
Unpacking
Carefully remove all protective material from the pack and verify that the following were received:
1 x NLS-DC850 main unit
1 x USB cable
1 x AC adapter for the DC850
1 x Li-polymer battery
1 x Hand strap
1 x Quick Start manual
Getting Started
Use the DC850 for the first time.
Step1: Install the battery.
Step2: Press the power key to switch on the DC850.
Step3: Program the DC850.
Installing the Battery
Install the battery per below steps:
Step 1: Unlock the battery cover latches.
Step 2: Remove the cover.
Step 3: Insert the battery as indicated in the battery compartment, with its metal contacts facing down and lining up with the
metal contacts on the inside of the terminal.