■
NL-8510 POS user manual
f
、
Under the menu shown as Figure 3-33, press Key“6”initiate serial port baud rate
⑤
Under the menu shown in Figure 3-16, press Key “5” to perform Ethernet Test, shown as
Figure 3-35
____
Ethernet
____
1 MAC 2 IP
3 svr IP 4 socket
figure 3-35
a
、
Under the menu shown in figure 3-35,Press Key “1” to display the MAC address of the
POS. Press “F2” to change the last bytes if needed; the first three bytes can not be
changed.
b
、
Under the menu shown in figure 3-35, press Key “2” to display current network setting or
to reset IP address, subnet mask and gateway of the POS.
c
、
Under the menu shown in Figure 3-35, press Key “3” to reset the current server
IP and port number.
d
、
Under the menu shown in figure 3-35, press Key “4” to choose DNS of testing type are
TCP or UDP protocol, base on the chosen protocol type, create socket, bind object and
connected backend
30